Heavy duty rollers rotate the crop into the
bale
The inner reinforcing discs increase the
durability of the roller
Reduced crumbling of crop
with Bale Trak ribbed roller profile
Heavy-duty bearings with
reinforcing plates for additional strength |
Fixed bale chamber roller system
Unique construction of the
rollers
Made from high-grade steel, the rollers
with ribbed profile and 3 mm wall thickness are extremely sturdy due
to their particular shape and internal strength. The small diameter
rollers (190 mm) provide maximum density keeping horsepower
requirement to a minimum. This superb roller design ensures 100 per
cent reliability, no matter if extremely wet silage or dry straw has
to be handled. |
Internal strength
The inner reinforcing discs
and solid forged one piece end discs and shafts are a design unique to
Vicon reducing stress concentration on the drive shaft and increasing
durability of the roller.
The shaft ends with toothed
profile are capable of withstanding the most severe loads - a guarantee of
durability and reliable operation.
Serrated roller
Bale Trak ribbed profile section has a steep faced front edge to
maintain the turning force on the bale even in low friction conditions
such as dry short straw.
Well designed roller
bearings
The sturdy drive train of the compression rollers is conceived to
withstand the most severe loads. Rollers are mounted on heavy-duty
bearings which are securely bolted onto the bale chamber walls with
reinforcing plates for additional strength. |
